讨论一下高压反应釜受热变形的起因
发布日期:2019-09-19 04:37:31 访问次数:904
小易为你先容一下高压反应釜受热变形的起因
1.根据高压反应釜的产品性能,反应器设备可以承受高温。 基本上,没有变形这样的东西,但是不可能排除某些特殊情况。
2.当高压反应器设备在实际使用过程中使用时,当水质失效或水渣过多时,通常会引起反应器变形。
3.在设计高压反应器时,混合器的布局很差。 此时,该装置可能无法在实际操作中长时间承受热量并变形。
通常,在高压反应釜的操作中,加热表面需要不时地使用水进行冷却工作。 但是,当出现问题或冷却工作停止时,设备可能会过热并变形。
英文:
iaoyi will introduce the cause of thermal deformation of high-pressure reactor for you.
1. According to the product performance of the autoclave, the reactor equipment can withstand high temperature. Basically, there is no such thing as deformation, but it is impossible to rule out some special cases.
2. When the high-pressure reactor equipment is used in the actual process, when the water quality fails or excessive water slag, the reactor will usually be deformed.
3. In the design of high-pressure reactor, the mixer layout is very poor. At this point, the device may not be able to withstand heat and deformation for a long time in actual operation.
Usually, in the operation of high-pressure reactor, the heating surface needs to be cooled by water from time to time. However, when problems arise or cooling stops, the equipment may overheat and deform.
上一文章:不锈钢反应釜的气密性试验
下一文章:螺旋板换热器防垢处理
联系太阳2007娱乐官方网站

180-1839-6999
电话号码0510-85182188
企业邮箱wxsssh@163.com
地址无锡市滨湖区胡埭工业园负来桥路10号